Con-Serv Manufacturing

Reverse Osmosis/Spot Free Rinse System

                              Con-Serv Manufacturing Reverse Osmosis  
 
             
Skip to Products                                                            Skip to Product Cut Sheets



Reverse Osmosis

Reverse osmosis refers to a process of water purification that has been used primarily for the desalination of seawater. To understand reverse osmosis, it is first necessary to understand osmosis. Osmosis is the term for the phenomenon whereby if a semi-permeable membrane separates two salt solutions of different concentration, water will migrate from the weaker solution through the membrane to the stronger solution, until the solutions are of the same salt concentration. Reverse osmosis subverts this process. It involves applying pressure to reverse the natural flow of water, forcing the water to move from the more concentrated solution to the weaker. The semi-permeable membrane is porous, allowing water to pass through, but blocking the passage of the bulkier salt molecules (Binnie, Kimber, & Smethurst, 2002


The semi-permeable membranes for reverse osmosis treatment are generally constructed from polyamide-based materials. These materials are resistant to biological degradations, but are subject to chemical attacks from chlorine.

Reverse osmosis has been used as a method of purification for ground and surface fresh water, in addition to its role as a desalinating agent. Working with such water sources creates some problems for the reverse osmosis system. Because of the very small pore sizes involved in the membrane, it is vital that ground and surface water is adequately pre-treated prior to the reverse osmosis process. Depending upon the hardness of the water involved, scaling of the membrane is likely to occur. If the concentration of the calcium or magnesium in the water (the chemicals that determine water’s hardness) is at a high enough level where the chemicals are insoluble, it will create a hard mineral on the inside of the membrane, rendering it impotent. (Vigneswaran & Visvanathan, 1995).

Steps to Design an RO / NF Membrane System

 

Accurate system design is critical to getting the most from your water treatment system. Dozens of factors can impact the productivity of a system. Reverse Osmosis System Design software is available from membrane manufacturers to allow application engineers to input data from a water analysis to offer the most precise design recommendations to optimize system performance.

An entire RO / NF water treatment system consists of a pretreatment section, the membrane element system, and a post-treatment section. The membrane element system includes an inlet for feed water and outlets for permeate and concentrate.

RO / NF system performance is typically characterized by two parameters, permeate (or product) flow and salt rejection. These should always be referenced to a given feed water analysis, feed pressure, temperature, and recovery. The goal of the designer of an RO / NF system for a certain required permeate flow is to minimize feed pressure and membrane costs while optimizing permeate quality and recovery.

The steps to design such a membrane system are described below:

1.   Consider Feed Source, Feed Quality, Feed / Product Flow, and Required Product Quality

2.   Select the Flow Configuration and Number of Passes

3.   Select Membrane and Element Type

4.   Select Average Membrane Flux (Design Flux)

5.   Calculate the Number of Elements Needed

6.   Calculate the Number of Pressure Vessels Needed

7.   Select the Number of Stages

8.   Select the Staging Ratio (Array Ratio)

9.    Balance the Permeate Flow Rate  


(source Dow Filmtec membranes)



Reverse Osmosis systems are used throughout the world the world to improve the quality of drinking water and the water that's critical to essential industrial processes like chemical processing, power generation, the manufacturing of food and pharmaceuticals, and Spot (mineral) Free Rinse Water. Reverse Osmosis technology is also vital to desalination and water reclamation efforts in communities with severe water shortages. See below for a brief list of categories and applications.



       



Con-Serv Manufacturing Supplies a broad range of Reverse Osmosis to meet the most demanding standards for Water Quality. Many systems are custom designed to meet specifications for individual projects.


The CSERO Series Reverse Osmosis System includes 2.5" and 4" membrane models to choose from. It is our most economical system with flow rates of 500 to 3600 GPD.

 

             
CSERO Series
 

 

 

 

 

 

 

 

 

 

    The CSRO Series is designed to house upto (6) 4" x 40" membranes. Loaded with the necessary instruments for optimal control. Many options come standard in the CSRO. The system can be configured to include additional options to optimize the performance and value.  

 

 

 

 

 

 

 

 

                                                              
                                                                      CSRO Series


The Eliminator Spot Free Rinse System is one of the highest quality Car Wash Spot Free Rinse Systems manufactured in the industry. Models incorporate aluminum wall or frame mounting, stainless steel pumps, pressure vessels, valves and high pressure hoses. Patented physical water conditioner eliminates the need for a water softener in most cases. All Eliminator Spot Free Rinse models come standard with integrated cleaning feature, TDS monitor, flow meters, low pressure reset, auto backwash carbon pre-filter and much more.
 

 

                                                                                               
                                                                                                               Eliminator Series




Con-Serv Manufacturing combines Reverse Osmosis with a pressure tank to deliver pressurized water to point of use. Flow rates from 250 GPD to 1200 GPD makes this a great solution for applications requiring a small flow rate of quality water in a small footprint.


               
     Pressurized Reverse Osmosis System





Con-Serv Manufacturing Reverse Osmosis systems provide the right combination of value and features required for any desalination application. Every Con-Serv R.O. system is manufactured from the highest quality components to the exacting standards of all Con-Serv Manufacturing equipment. Standard R.O. models are available for any industrial application from 1,600 to over 500,000 GPD.

                                         
                                             Large Brackish Water Reverse Osmosis System



Con-Serv Manufacturing Double-Pass Reverse Osmosis systems provide the right combination of value and features required for any high-purity application. Con-Serv Manufacturing can custom design Double Pass  R.O. systems to meet standards required for high purity water for any application. Standard models also available for any commercial application from 1,600 to over 150,000 GPD.

                                                               
                                                                                  Double Pass Reverse Osmosis System


Con-Serv Manufacturing Sea Water Reverse Osmosis systems provide the right combination of value and features required for any desalination application.  Standard Con-Serv models are available for any commercial application from 1,600 to over 150,000 GPD. Con-Serv Manufacturing Sea Water Reverse Osmosis systems are designed to produce potable permeate water from sea water of up to 50,000 ppm of TDS. Systems equipped with energy recovery systems as standard equipment are the most cost effective in the industry, capable of energy efficiencies below 3.0 kW-hrs/m3.

  

                       
                           Seawater Reverse Osmosis Systems


The Con-Serv Manufacturing line of Commercial Reverse Osmosis units are available in a complete water purification system for water bottling. “Water Store” plants provide the total water treatment process including pre-treatment, reverse osmosis, post-treatment, disinfection, product storage, and repressurization.

                                        
                                                               "Bottled" Water Store